Talk to an engineer

Gate Drivers

One driver family, every major module manufacturer

Our gate drives use the same power and fibre-optic interfaces as other commercial products, with embedded PLD and software technology that lets the power stack designer configure and monitor the driver in situ while the converter runs normally.

Why this platform

What you get that a commercial driver does not

Configurable over fibre

Change gate resistors, CGE, clamping and timings without opening the stack.

Reduced inventory

One driver covers modules from several manufacturers, so sourcing stays flexible.

Fault code tracking

Event counters and diagnostics download straight from the driver for fault analysis.

Tested to standards

Designed and tested to international standards including EN 50155 and IEC 61800-5-1.

Production range

Current products

Every driver below is in production or sampling today.

ImageProductMountingDescriptionModule classStatus
AP12GOn-moduleSingle on-module gate drive for 1200 V high-power modules, configured in situ over the fibre-optic link.1.2 kVProduction
AP17GOn-moduleSingle on-module gate drive for 1700 V high-power modules, configured in situ over the fibre-optic link.1.7 kVProduction
AP33AOn-modulePlug-and-play 3300 V gate drive for 140×190 mm IGBT modules from all major manufacturers.3.3 kVProduction
AD00XA8Off-moduleSingle off-module gate drive and direct InPower replacement, with a simple module interface card.1.2 kV · 1.7 kV · 3.3 kVProduction
AP03LOff-moduleDual-channel off-module driver supporting up to 3300 V, with module interface cards for XHP3, nHPD², LinPak and LV100.1.7 kV · 3.3 kVProduction
AP05JOff-moduleSingle-channel baseboard for 4500 V and 6500 V modules, used with an external isolated DC-DC converter.4.5 kV · 6.5 kVProduction
AE00NOn-moduleCost-optimised dual-channel E-Series driver for 1700 V to 3300 V modules, factory configured.1.7 kV · 3.3 kVProduction
AE00MOn-moduleCost-optimised dual-channel E-Series driver for 1700 V to 3300 V modules, factory configured.1.7 kV · 3.3 kVProduction
AE45KOn-moduleDual-channel 4500 V driver with active clamping and a wide input voltage range.4.5 kVSampling
ASD6/ASD7DC-DC12 kV DC working, fault-tolerant isolated supply for 4500 V and 6500 V gate drives.4.5 kV · 6.5 kVProduction
CE00LBCoreGate drive core with active clamping and an electrical interface, for integration into your own design.—Production
XS000026/27ComponentCompact, low-profile 15 V or 24 V gate drive transformer for your own in-house driver design, with 6 kVrms baseplate isolation.3.3 kVProduction
6500 on-moduleOn-moduleSingle-module and two-in-parallel on-module driver for 6500 V HPM, with an off-module DC-DC converter.6.5 kVSampling

Off-module drivers require a module interface card (MIC) fitted to the power module and connected to the driver by ribbon cable.Ask us which MIC you need →

Development roadmap

What is coming next

Subject to change. We keep the status current — if you are interested in something here, tell us and we will give you the real timeline.

PrimePACK driver across three modules in parallel
In development

PrimePACK On-Module Gate Drive

On-module driver for PrimePACK modules, in single, two-in-parallel and three-in-parallel configurations.

Working with lead customers.

Details →
4500 V off-module gate drive baseboard
In development

4500 V Off-Module Gate Drive

Single-channel baseboard with a 4500 V module interface card, supporting up to three modules in parallel.

Engaging customers for initial feedback.

Details →

Module interface cards

The adapter between driver and module

Off-module drivers connect to the power module through a MIC, fitted to the module and joined to the driver by ribbon cable. The MIC does the adapting, which is why one driver covers so many packages.

nHPD², two modules in parallel at 4 mm spacing.
  • XB000145-02 — 3.3 kV

nHPD², two modules in parallel at 4 mm spacing.

For AP03L

High-voltage module interface card for 4500 V and 6500 V HPM packages.
  • XC000042-02 — 4500 V
  • XC000040-02 — 6500 V

High-voltage module interface card for 4500 V and 6500 V HPM packages.

For AP05J

nHPD² module interface card.
  • XC000070-04 — 1.7 kV
  • XC000026-04 — 3.3 kV

nHPD² module interface card.

For AP03L

LV100 module interface card.
  • XC000072-01 — 1.7 kV
  • XC000192-01 — 2.0 kV
  • XC000085-01 — 3.3 kV

LV100 module interface card.

For AP03L

Supports up to three modules in parallel.
  • XC000102-04 — 3300 V

Supports up to three modules in parallel.

For AP03L

Datasheets

Tell us the module and we will send the datasheet

Datasheets and technical manuals are available on request while we move them onto the new site.