Talk to an engineer

AP Series · Off-module

AD00XA8 Off-Module Gate Drive

Single off-module gate drive and direct InPower replacement, with a simple module interface card.

In production

AD00XA8 D series off-module gate drive

The AD00XA8, known as the D series, is a single-channel off-module driver intended as a replacement for InPower drivers already in service. It uses a single-level clamp and does not measure Vge or Vce; where those are needed, the AP03L is the better fit.

Refer to the AD00XA8 technical manual for the full interface description.

Features

  • Drop-in InPower replacement
  • Single-level clamp
  • Wide 14–30 V input range
  • Requires a simple module interface card (MIC)

This driver needs a module interface card fitted to the power module. Ask us which parts you need →

Also in AP Series

Related drivers

AP12G

Single on-module gate drive for 1200 V high-power modules, configured in situ over the fibre-optic link.

Details →

AP17G

Single on-module gate drive for 1700 V high-power modules, configured in situ over the fibre-optic link.

Details →

AP33A

Plug-and-play 3300 V gate drive for 140×190 mm IGBT modules from all major manufacturers.

Details →

AP03L

Dual-channel off-module driver supporting up to 3300 V, with module interface cards for XHP3, nHPD², LinPak and LV100.

Details →

Get in touch

Designing with the AD00XA8?

Tell us the module, the topology and the application. We will confirm the parts you need and send the datasheet.