Talk to an engineer

Power electronics · Bedfordshire, United Kingdom

Gate drivers for converters that cannot stop.

They switch the module — and tell you when it is starting to go.

We design and manufacture the Amantys gate drive platform for railway traction, wind turbines and medium-voltage motor drives. One family covers IGBT and silicon carbide modules from every major manufacturer.

Module voltage classes supported
1.2–6.5 kV
Isolated DC-DC working voltage
12 kV DC
Modules in parallel, no hardware change
×3
Temperature streaming over fibre
Patented

What we make

A gate drive, and the technology inside it

Two things come in the same package, and customers buy us for both. One of them is the reason the other is worth having.

01 — The gate drive

Switches the module, and drops into the design you already have

1.2 kV to 6.5 kV, IGBT and silicon carbide, single and dual devices, on-module and off-module. It takes the same power and fibre-optic interfaces as other commercial gate drives and sits on the standard footprints.

See the range →

02 — The technology

Measures the semiconductor, and tells you what it finds

Gate–emitter and collector–emitter voltage, board and module temperature, fault counts — measured at the device and reported over the fibre that already carries the control signal. Logged over time, a converter reports its own condition instead of waiting to fail.

How it works →

We moved the industry here

When Amantys began, a gate drive switched a module and did nothing else. Taking measurements at the semiconductor and reporting them was ours, and for a long time it was ours alone. Others are building it in now. That is the clearest evidence we read it right.

Being first is not the same as being risky

The measurement is the new part. Everything around it is deliberately ordinary — standard interfaces, standard footprints, drivers already in service in railway traction and wind, where nobody forgives a surprise. The novelty is in what the driver knows, not in how it fits.

Product

Gate Drivers

E-Series and AP platforms for IGBT and silicon carbide MOSFET modules. Factory configured or field configurable, with fault code tracking and NTC temperature measurement streamed over the fibre-optic link.

View platforms and datasheets →

Service

Design Services

Power converter design, from specifying the right IGBT, SiC MOSFET or power capacitor through to a finished product. Contract design backed by strong links to UK academic institutions.

Discuss a project →

Solutions

Power Quality

Active harmonic filters, static VAr generators, hybrid compensators and power factor correction — specified, supplied, installed and maintained from 30 A to 10 MVAr equivalent.

See the solution map →

Built in the UK, the EU and India — four sites, so a programme never depends on one plant or one customs regime.See where we manufacture →

Module support matrix

Which driver fits your power module?

87 qualified power modules from 3 manufacturers, each with the Poweronics drivers that support it. The list is not exhaustive — if yours is missing it is usually still supported, so ask.

Can't find your module? Send us the part number — we add modules regularly and will confirm support.

Two platforms

Fixed configuration, or configurable in the stack

Both platforms share the power and fibre-optic interfaces used by other commercial gate drives, so they drop into existing controller designs.

What the driver measures, in two minutes →

All 13 products
AE00 dual-channel E-Series gate drive

E-Series

Factory configured

  • 1.2 kV → 3.3 kV, silicon carbide ready
  • NTC temperature measurement, streamed over fibre using the patented Amantys protocol
  • Gate resistors and CGE adjustable by hand
  • nHPD², LinPak and LV100 footprints
  • Cost optimised, up to four in parallel
AP Series on-module gate drive fitted to a power module

AP Series

Field configurable

  • 1.2 kV → 6.5 kV, single and dual devices
  • Everything in the E-Series, plus software configuration of Rg(on), Rg(off), CGE, active clamping and timings
  • Configured in situ via the Power Insight Adapter — no hardware changes
  • On-module and off-module packages
  • Fault code tracking and event counter download

News

What we have been working on

All updates

Poweronics at PCIM Europe 2024

The team showed the AP platform and the 6500 V on-module driver at PCIM Europe in Nuremberg.

Read →

Poweronics acquires the Amantys gate driver business

Design, manufacture and support of the Amantys gate drive platform and Power Insight technology transfer to Poweronics.

Read →

Get in touch

Let's work on your next converter

Tell us the module, the topology and the application. We will come back with the driver options and a datasheet.